+91 94443 96700
Available options | Infill device in front version (font OCR B1) or in rear (font OCR A1 or MasterCard) . Chip contact initialising. FLIP-OVER module (front/rear print) . Floor stand unit for Pro-Series. |
Bar codes | Code 39, EAN8, EAN13, 2/5 int, Code 128, Codabar and others. |
Built-in tipper unit | Off-line tipping possibility (11 lines) . Ribbon saving feature. |
Communication interface | Serial RS232 port and parallel port. |
Dimensions and weight | 1200 x 480 x 350 mm x 80 kg. (47,25"x19"x13,75"x178 lbs) |
Drum capacity | Drum capacity: 105 characters, embossing and/or infill. |
Electrical requirements | 117 V / 60 Hz - 220 V / 50 Hz. |
Fonts/printing | Internal or Windows true type fonts. |
Graphics | Lines, frames, logos, photo images. |
Input hopper capacity | 200 cards. |
Magnetic stripe encoding | 3 Tracks 3 ISO 7811, LoCo-MeCo/HiCo. |
Output hopper capacity | 200 personalised cards. Reject hopper. |
Performance | Approx. 500 CPH standard credit card format in embossing. |
Printing area | Full card size. |
Printing orientation | 0 degree, 90 degree, 180 degree, 270 degree |
Resolution | 300 DPI |
Ribbon saving feature | Standard. |
Software | Windows based application software. Firmware: self diagnostic, selectable automatic repeat card, pre-encoded card reading with full post processing of the same card, resettable and non resettable counters. System status and diagnostic messages reported on PC. Optional LinkWare application for in-line operation with other Pro-Series modules. |